Garage doors are considered the ultimate convenience for your home. In fact, a quality garage door helps protect your car from inclement weather and your belongings from theft. A new door provides at least an 85% of return on investment when selling your home. The garage door opener plays an important part in the opening and closing of the garage door. There are different types of garage door openers on the market. The chain-driven opener is one of the most popular products on the market. This article provides information on garage door chains.

The chain-driven opener will use a chain to drive the trolley and lower or raise the garage door. Although chain-driven systems are quite economical, they tend to create a lot of noise in the opening and closing function. In case the garage door is detached from your home, noise won’t be a big issue for you. But your garage is near the living room or a bedroom, you may have to consider another option.

If your garage door doesn’t open or close properly, it may be due to a problem with the chain. Replacing garage door chains is not an easy task. You shouldn’t attempt to replace the chain if you don’t have any experience in the field. It is better that you call a professional garage door repair company under such circumstances. In fact, a professional garage door repair company will replace the chain quickly, and it won’t cost you an arm and a leg. You save yourself from injuries when you work with a reliable garage door repair in the area.

There are hundreds of garage door repair companies on the market. But all of these companies are not the same. You should be doing the research first when choosing the best garage door repair company in the area.

Does your garage door need new torsion springs? This can be a big job and before you decide to tackle a garage door torsion spring replacement on your own, there are a few things to consider. Even if you’ve replaced the extension spring yourself, replacing the torsion spring is a completely different animal. First, you have to find the right replacement spring and then the replacement itself can be downright dangerous.

Since your garage door is good for about seven years before the springs will need to be replaced, this is a common situation. Replacing the torsion spring is complicated and should only be done by someone who understands the mechanics of the system. This can be a dangerous job if not done correctly.

If you decide to tackle it yourself, you must take the right precautions. The tension in the spring must be safely released before any work can begin. Releasing the tension in the spring is where the danger comes in and if you’re not careful, it is possible to lose a finger or worse. This is why it is recommended to leave torsion spring replacement to the professionals.

If you still want to try this job yourself, be sure to take a few precautions. First as mentioned earlier, release all of the tension from the current torsion spring. Never touch the cable drum and make sure you never use a screwdriver to wind the spring off or on.

Always be sure to insert a well-fitting bar into the winding core before you loosen the setscrews. This ensures you can control the spring. Do not use a box wrench or a socket wrench to loosen the touch screw. There are special tools for this. Last, after the spring is wound, do not touch the bracket.

Even though you have completed numerous DIY projects, consider hiring a professional for a garage door torsion spring replacement. This is a dangerous task and someone could get hurt.